Anki integration

SubMiner talks to Anki through the AnkiConnect add-on. It fills new cards with the sentence, an audio clip, and a screenshot, and can create sentence cards and merge duplicate words. It is built for the Lapis, Kiku, and Senren note types, but works with any note type once you map its fields.

For the day-to-day flow, see Mining workflow. Every key on this page, with its default, is listed in the AnkiConnect config reference.

Prerequisites

1. Install Anki.
2. Install AnkiConnect (add-on code 2055492159).
3. Install FFmpeg and make sure it is on your PATH. SubMiner uses it for audio and images.
4. Keep Anki running while you mine.

If you changed AnkiConnect's port, set ankiConnect.url to match.

How cards get filled

When Yomitan or Hachidori adds a note, SubMiner fills the sentence, audio, image, and MiscInfo fields. It finds new notes in one of two ways:

• Proxy (default). SubMiner runs a local AnkiConnect-compatible server. The dictionary sends notes through it, and SubMiner fills each one right after Anki accepts it.
• Polling. With ankiConnect.proxy.enabled set to false, SubMiner asks AnkiConnect for recently added notes every ankiConnect.pollingRate milliseconds.

Set ankiConnect.behavior.autoUpdateNewCards to false to stop automatic filling and update cards by hand with Ctrl/Cmd+V instead.

ankiConnect.deck limits enrichment and duplicate checks to one deck. If it is empty, SubMiner uses Yomitan's mining deck when it can read it, and otherwise searches all decks.

Proxy mode setup (Yomitan / texthooker)

"ankiConnect": {
  "url": "http://127.0.0.1:8765",
  "proxy": {
    "enabled": true,
    "host": "127.0.0.1",
    "port": 8766,
    "upstreamUrl": "http://127.0.0.1:8765"
  }
}

Clients must send notes to the proxy (http://127.0.0.1:8766 here), not to AnkiConnect directly.

• Bundled Yomitan. SubMiner sets the active Yomitan profile's Anki server for you. With the proxy on, it always points the profile at the proxy. With the proxy off, it sets ankiConnect.url, but only if the profile's server is blank or the stock http://127.0.0.1:8765.
• Browser Yomitan or other clients. Set the Anki server to the proxy URL yourself. To leave your main profile alone, create a separate Yomitan profile for SubMiner, set its Anki server (Settings, Anki) to the proxy URL, and make it active while you mine.
• Hachidori. SubMiner routes Hachidori to the proxy while it is active. Keep the proxy on for screenshots and sentence audio.

Hachidori settings from SubMiner

With the Hachidori backend, SubMiner fills Hachidori's first Anki template from your ankiConnect settings on startup and whenever you open Hachidori Settings:

• The deck always follows ankiConnect.deck, because polling only looks for new cards in that deck.
• While the template still has Hachidori's default hachidori tag, the configured tags are added ahead of it so cards carry both. Tags you edit in Hachidori settings are kept as written.
• Missing word, sentence, pronunciation-audio, and picture mappings are filled with fields that exist in Anki. Pronunciation uses fields.wordAudio, or fields.audio when no word-audio field is set.
• If the note type is unset, SubMiner picks the one note type that has your word and sentence fields. Enabled Lapis, Kiku, or Senren narrows the search. A fresh mapping also gets Hachidori's matching preset for readings, definitions, and other known fields.

Apart from the deck, SubMiner only fills missing settings. Custom tags, field mappings, advanced templates, and extra templates stay as you set them. If several note types match, pick one in Hachidori Settings. If Anki was closed, start it and open Hachidori Settings again to retry.

Sentence audio, image timing, translation, metadata, and field grouping stay under SubMiner's control. Pronunciation sources are set in Hachidori. Linking an external dictionary host does not change any of this.

Proxy troubleshooting

If cards are not getting filled:

1. Check that the proxy is listening while SubMiner runs:

   ss -ltnp | grep 8766

2. Check that requests pass through to Anki:

   curl -sS http://127.0.0.1:8766 \
     -H 'content-type: application/json' \
     -d '{"action":"version","version":2}'

3. Read the app log (app-YYYY-MM-DD.log) in the logs folder. See Troubleshooting for where logs live.

Field mapping

ankiConnect.fields maps SubMiner's data to fields on your note type.

Key	Receives
fields.word	The mined word
fields.audio	Sentence audio cut from the video
fields.wordAudio	Read only: Yomitan's word audio, used to time animated images (see below)
fields.image	Screenshot or animated clip
fields.sentence	Subtitle text
fields.miscInfo	Text from ankiConnect.metadata.pattern

"ankiConnect": {
  "fields": {
    "audio": "SentenceAudio",
    "sentence": "Sentence"
  }
}

Field names are matched case-insensitively. A mapped field that is missing from the note type is skipped.

Hachidori prepares downloadable word audio before it saves a note through the proxy, so the animated image delay works on the first mine. Set a downloadable pronunciation source in Hachidori's Audio settings. Browser speech cannot be saved to Anki. Without word audio, Hachidori shows a warning and the card gets no word-audio hold.

fields.audio gets sentence audio, not word audio. Yomitan writes its own dictionary audio into your note (often ExpressionAudio), so keep fields.audio pointed at a separate field such as the default SentenceAudio. Pointing it at Yomitan's word-audio field would overwrite that audio.

ankiConnect.tags adds tags to every mined or updated card. Set it to [] to add none.

ankiConnect.metadata.pattern builds the MiscInfo text. Tokens: %f file name, %F file name with extension, %t timestamp, %T timestamp with milliseconds, <br> line break.

Media

Key	What it does
media.generateAudio	Cut sentence audio (MP3) from the subtitle's start and end time
media.audioPadding	Seconds added before and after the clip
media.fallbackDuration	Clip length when the subtitle has no timing
media.maxMediaDuration	Longest allowed clip, in seconds (0 removes the cap)
media.normalizeAudio	Normalize clip loudness
media.mirrorMpvVolume	Scale the clip by mpv's current volume, so quiet playback gives quiet clips
media.generateImage	Capture an image
media.imageType	static for one frame, avif for an animated clip of the line
media.imageFormat	Static format: jpg, png, or webp
media.imageQuality	Static image quality
media.imageMaxWidth / Height	Static size limit (0 keeps source size)
media.animatedFps	Animated clip frame rate
media.animatedMaxWidth / Height	Animated size limit (0 keeps aspect ratio)
media.animatedCrf	Animated quality, 0 to 63, lower is better
media.syncAnimatedImageToWordAudio	Hold the first frame for the length of the word audio in fields.wordAudio, so the motion starts with the sentence audio
media.reviewTiming	Pause and let you adjust the clip before media is made (see below)

Animated AVIF needs an FFmpeg build with an AV1 encoder (libaom-av1, libsvtav1, or librav1e).

Media settings apply to the next card without a restart.

Review media timing

With media.reviewTiming on, SubMiner pauses before making media for word, sentence, and audio cards and opens a review dialog. You can also toggle it for the current session with Review Media Timing in the runtime options palette (Ctrl/Cmd+Shift+O). Clipboard updates and stats-dashboard mining skip the review.

Playback stays paused while the dialog is open, even if the popup or hover that paused it goes away. When the dialog closes, playback resumes if it was playing before, or if the popup closed in the meantime. A popup that is still open keeps it paused.

The dialog shows the clip over a speech waveform. When the waveform loads, an untouched clip end moves back to just after the last speech in the line. The orange bars still mark the subtitle's original start and end.

During preview, the yellow cursor follows the audio player's position through the selected range and stays at the end when playback finishes. Buffering pauses the cursor too. If the player stops reporting progress for 15 seconds, the preview stops so you can retry.

Action	How
Trim	Drag either edge, or click the waveform to move the nearer edge there
Nudge an edge	Arrow keys on a focused edge (100 ms, Shift for 500 ms)
Slide the clip	Drag the middle
Show more timeline	Earlier / Later
Pick the screenshot	Screenshot slider or Frame buttons (static images only)
Add previous / next line	P / N (Shift+P / Shift+N removes)
Preview	Space
Confirm	Enter
Cancel	Escape

The confirmed range is used as is, with no extra padding. Added lines go into the sentence field. Reset restores the original timing and removes added lines.

When you cancel, you can go back to editing, keep the original timing, create the card without media, or discard it. Discard deletes the Yomitan note or audio card, and skips creation for a sentence card.

With a controller

With controller support on, the dialog has its own controller layout, and each button shows its controller shortcut once SubMiner has seen a controller, which takes one button press after connecting it. It works with or without keyboard-only mode, and the controller's usual actions pause until the dialog closes. Buttons that were already held when the dialog opened, such as the mine button, wait for a fresh press.

A, B, X and Y mean the letters printed on your controller. Pick your controller's Button Style in Alt+C: choose Nintendo if A is on the right and B at the bottom (Switch-style and many 8BitDo pads). On PlayStation, A is ╳, B ○, X □ and Y △, and the shortcuts on screen show those symbols.

Hold L1 or R1 and press the D-pad for the combos. L1 covers the clip start and the lines before it, and R1 the clip end and the lines after it. D-pad actions repeat while held.

This is the default layout:

Controller	Editing	After Cancel
A	Use this timing	Use original timing
B	Cancel	Keep editing
X	Play selection	Without media
Y	Reset timing	Discard
D-pad left / right	Earlier −2s / Later +2s
D-pad up / down	Previous / next screenshot frame
L1 + D-pad left/right	Start −0.1s / +0.1s
L1 + D-pad up/down	Add / remove a previous line
R1 + D-pad left/right	End −0.1s / +0.1s
R1 + D-pad up/down	Add / remove a next line
L1 + R1	Reset the screenshot frame

To change it, open Alt+C and expand Review media timing. Click an action's pencil, then press a button, or hold one button and press another to make a combo; the first button becomes the one you hold. Any button can be a hold button. Changes are saved per controller, and Reset all brings back the default layout.

Nudges, Earlier/Later, lines and frames repeat while held whichever buttons they are on. A row warns you when two actions on the same step share an input, or when an action uses a button alone that other actions hold.

Update behavior

Key	What it does
behavior.overwriteAudio	Replace existing audio instead of adding to it
behavior.overwriteImage	Replace the existing image instead of adding to it
behavior.mediaInsertMode	append or prepend new media when not overwriting
behavior.autoUpdateNewCards	Fill new Yomitan notes automatically
behavior.highlightWord	Bold the mined word in the sentence field
behavior.notificationType	overlay, system, both, or none

Manual clipboard updates (Ctrl/Cmd+V) always replace the sentence audio, whatever overwriteAudio says.

Sentence cards (Lapis)

Ctrl/Cmd+S creates a standalone sentence card from the current line, and Ctrl/Cmd+Shift+S then a digit combines several lines. The card uses the note type named in ankiConnect.isLapis.sentenceCardModel, which must exist in Anki. If it is empty, no card is created.

"ankiConnect": {
  "isLapis": {
    "enabled": true,
    "sentenceCardModel": "Lapis"
  }
}

Sentence cards and audio cards (Ctrl/Cmd+Shift+A) always write to the Sentence and SentenceAudio fields. Normal word cards keep using your ankiConnect.fields mapping.

Word card type (Kiku/Lapis)

When isKiku or isLapis is enabled, SubMiner sets a card-type flag on word cards it fills. Choose the flag with ankiConnect.lapisKiku.wordCardKind:

Value	Flag
word-and-sentence	IsWordAndSentenceCard
click	IsClickCard
sentence	IsSentenceCard
audio	IsAudioCard
none	Leaves flags alone

The other card-type flags are cleared. Sentence cards and audio cards keep their own flag.

Field grouping (Kiku/Senren)

When you mine a word that already has a card, SubMiner can merge the new card into the old one. The sentence, audio, image, and MiscInfo from both cards are kept as grouped entries, and the template lets you switch between them. This works with Kiku and Senren (which calls it scene switching).

Enable one of them. They write different markup to the same fields, so only one can be on. If both are enabled, Kiku is used and SubMiner logs a config warning.

"ankiConnect": {
  "isKiku": {
    "enabled": true,
    "fieldGrouping": "manual",
    "deleteDuplicateInAuto": true
  }
}

For Senren, use the same keys under isSenren.

fieldGrouping	Behavior
disabled	No duplicate check
auto	Merge into the existing card. With deleteDuplicateInAuto, delete the new card
manual	Show both cards, let you choose which to keep and preview the merge

Grouping runs when a new note is added while duplicates exist. With Hachidori, that is the popup's Add anyway choice. Overwrite updates the existing note in place and only gets media.

The manual dialog cancels itself after 90 seconds. Identical entries are not deduplicated. Press Ctrl/Cmd+G to run the duplicate check on the last card yourself.

Key	Action
1 / 2	Keep card 1 or card 2
Enter	Confirm
Backspace	Back from the merge preview
Esc	Cancel and leave both cards unchanged

With a controller

With controller support on, the dialog has its own controller layout, and each control shows its controller shortcut once SubMiner has seen a controller. Like the media timing review, it works with or without keyboard-only mode, A/B/X/Y are the printed letters (set by Button Style in Alt+C), and a button already held when the dialog opens waits for a fresh press.

Controller	Choosing the card	Merge preview
D-pad left / right	Original card / New card
D-pad up / down		Scroll (repeats)
A	Continue	Confirm merge
B	Cancel	Back to the card choice
X	Turn "Delete duplicate" on or off
Y		Compact / Full

To cancel from the preview, press B twice, or bind the preview's Cancel row (unbound by default). Change any of it in the Duplicate card (field grouping) group of Alt+C, the same way as the review layout.

Config validation

Invalid ankiConnect values produce a warning and fall back to the default. Use JSON booleans (true, not "true") and a positive number for pollingRate.